Product Description
This machine is used to draw φ 8mm copper wire to φ 2.8 -φ 4.0mm annealed soft copper wire or half-hard copper wire
It adopts four quaternary drawing cones, one metering capstan is driven by separate motor, so that the finished product can be continuously coiled on capstans. By many protective methods, the machine runs steadily and safely. Meanwhile, it is easy to operate due to its automatic and humanistic designation.
The surface of the cone pulley is spouted by aluminum oxide in order to ensure its abrasive resistance, decrease the metal abrasion during drawing and improve the speed and quality of wire drawing. In addition, the operation cost is low by its convenient maintenance and adopting vector frequency transformer.
Equipment main technical parameter
(1) Inlet diameter φ8
(2) Outlet diameter φ2.8~φ4
(3) Outlet speed 8.1m/s
(4) Max drawing die 9
(5) Outlet drum wheel diameter φ420
(6) Drum wheel transmission ratio 1.279~1.20
(7) Dies coefficient of elongation 1.31~1.22
(8) Total noise ≤85db
(9) Main motor YR315M2-8 P=132KW n=735rpm
(10) Take-up motor YLJ160-80-4 torque motor n=300~1200 rpm
(11) Take-up trolley reducer XLED42-1849 YXJ7134A 0.75KW
(12) Wire drawing capacity(per hour) ~1.8t
(13) Annealing diameter Φ0.8-Φ3.00
(14) Annealing wire speed 20--8 m/s
(15) Annealing power 215 kw
(16) Annealing voltage 60 V
(17) Annealing current 4000 A
Audited Supplier 
){kind=link}